Install Your Product; Plug In Power; Turn On Your Mini-Pro; Input Hdmi Signal Source - RGBlink Mini Pro Quick Start Manual

Install Your Product

Plug in Power

RGBlink mini-pro is packaged with a 12V power link cable and Type C power Adapter.
When linking the power supply, please check the power supply standard used in your
country/region. If you are using a power supply that does not have a lock, please tighten the power
connector of the device to ensure the stability of the mini-pro's power supply.

Turn on Your mini-pro

After mini-pro is connected to power supply, push the Power button on the rear panel,the
device will enter to the boot interface and enter operation interface within 10S.

Input HDMI Signal Source

You can use any camera, computer or other HDMI device as the input source of the mini-pro. It
supports up to 4 sources of different formats and resolutions at the same time via 4 HDMI ports,
and HDMI 1 supports up to 4K@60Hz. If you are using interlaced signal, mini-pro supports
de-interlacement through HDMI 1 automatically. The other 3 HDMI input ports support up to
1080p@60Hz without de-interlacement. You can see the resolution of the input signal on the
mini-pro screen when there is active signal plug in.
mini-pro
Connect mini-pro to power plug by the link cable
Quick Start
9