RGBlink X3 User Manual page 24

Format Type: Standard Type/Customize
Standard Resolutions: Can be chosen from the list as
shown in the right figure.
Customize: Customize output resolution. Click output
port and type in Width, Height and Refresh Rate.
Genlock Set
Status: Enable or disable the Genlock function by
sliding the Genlock switch. If select"ON", the output
resolution will be same with the resolution that
selected.
Input Source: HDMI or BNC can be selected in"Input
Source"by sliding the switch.
Test Pattern
Output Port: Output port to be tested.
Status: ON/OFF. Enable to select color bar or pure
color and preview the corresponding RGB values and
the color.
X3 User Manual
Standard Customize
23