RGBlink X3 User Manual page 22

Edit: Edit user name and password already
built.
Delete: Delete user name and password
already built.
Authorization Set: Functions on XPOSE 2.0
on this computer that the users are allowed to
operate.
Click the green block to remove the function not
to be permitted.
Slave Unit
Slave Unit is to control multiple devices simultaneously,
which are connected to same network. ("In the same
network" means that the the third section in the IP
address digits are the same )
XPOSE do operation on one device, same operation
synchronized to other devices. For example, there is
another devices linked to the same network, one with IP:
192.168.0.112, SN:0027; the other with IP: 192.168.0.129,
SN: 3344.
If you want the same operation on 3344 to be backed up
to 0027, you can do as follows.
1. Set device numbers；
2. Select the IP of the device in the drop-down menu
for Device IP;
3. Click ON, the tow device are connected when the
red pot turns to be green one
4. Click OFF to disconnect, it could not control two
device at the same time.
X3
;
User Manual
21