RGBlink X3 User Manual page 37

Other Operation on Layer
Layer
Backward
Layer Forward
Layer to
Bottom
Note：One signal occupies one layer (4K signal occupies four layers), signal can be dragged into the container
repeatedly.
Streaming
PVW Module supports to preview image.
Users can do refer to steps below:
1. Turn on Layer Preview, Input Preview, Scene Preview
or Expand Preview according to the actual need.
2. Turn on H.264 and users can preview the image. As
shown in the right figure, the interface shows that Layer
Preview, Input Preview, Scene Preview switch have been
turned on.
Note: H.264 is the master switch. If the user turns on H.264 first, it cannot be set successfully.
X3
Use the tools bar on top of window to do such operations.
Layer to Top
Select All
Copy Selected
User Manual
Paste Selected
Cancel Selected
Delete Selected
36