RGBlink X3 User Manual page 33

Customize Container
Click at the bottom of template list.
Monitor Layout: Auto or Manual
Steps of create container are as follows:
1. Fill in H Total/V Total and Row/Column,it will
calculate H item and V item automatically.
For example, if you would like to create a container
with 2 rows and 2 columns and each display has a
width of 1920 and a height of 540, the total width will
be 3840 and the total height will be 1080.
2. Click <Create>, the container will display in the
interface, and shows the width and height of each
Display.
3. Click<Save> to save the container.
Container Adjustment
1. Move: Drag the boarder of the display area to move
its place in the interface.
2. Scale: Click icon
the proportion of display area on interface.
3. Cancel: Press and hold
group.
Display
Output List：
White one：available
Gray one：unavailable
Operation Steps：
Left-mouse click the output and drag it to the display
of the set container.
Replacement：
Drag and drop the output into the corresponding
display. The output being replaced will turn from
gray to white in the list.
X3
to shrink, click to enlarge
to cancel the screen
User Manual
32