RGBlink X3 User Manual page 31

Fan Control
X3 supports auto/manual setting for fan speed.
Fan Speed: 0-100 adjustable
Notice: To avoid insufficient heat dissipation, the
recommended manual fan speed is not less than 30%.
Backup
Backup: Select ON or OFF to enable or disable
backup
Backup Mode: Set backup mode to Input Backup or
Preset Backup. Click "Add" below to add backup
source.
Power On
Power On Restart: Range from 0~255s
Front Lights: Select front lights effect
Factory Setting
Remove Logo: Clear the previous Logo
Remove EDID: Clear the previous EDID parameter
Save IP: No change of IP after reset
X3 User Manual
30