Table of Contents
Advertisement
CHAPTER
26
Transferring AutoRAE 2 controller data to a computer
Bump and calibration data is collected each time an instrument is bump tested or calibrated.
The AutoRAE 2 Controller collects this data and stores it on an SD Card, providing a convenient
means of storage and easy data transfer.
To download data to a computer from the device follow the next steps:
1. Connect a USB cable to the AutoRAE 2 Controller and to a PC running Safety Suite Device
Configurator (SSDC) software
2. Make sure the AutoRAE 2 Controller has power and is turned on.
3. Start Safety Suite Device Configurator (SSDC) software on the PC.
4. Select the Controller from the device's list and click on "Download Data"
Bump Test and Calibration results can also be downloaded from Safety Suite Device
Configurator (SSDC). Just click on Bump/Cal Results
AutoRAE 2
TRANSFERRING DATA
120
User Manual
Advertisement
Table of Contents
