Table of Contents
Advertisement
CHAPTER
25
Updating firmware on the AutoRAE 2 controller
Updates to the AutoRAE 2 Controller's firmware may be produced, and these can be loaded into
the AutoRAE 2 Controller using Safety Suite Device Configurator (SSDC) software running on a
PC.
1. Connect the Device to PC using the USB cable.
Note: The connected device is indicated with symbol "
2. Click on the Device serial number to access the details screen. Find the current firmware
version in the details screen as highlighted.
3. Click on 'Update' button. If the PC is connected to internet and the 'Firmware updates
using local file' setting is not checked, clicking the update button would set the firmware to
the latest version supported for the device.
AutoRAE 2
UPDATING CONTROLLER FIRMWARE
"
118
User Manual
Advertisement
Table of Contents
