Table of Contents
Advertisement
CHAPTER
2
Automatic test and calibration system
The AutoRAE 2 Automatic Test and Calibration System for new Honeywell portable gas
monitors makes compliance with monitor test and calibration requirements as easy as pressing
a button. Simply cradle the monitor and the system will take care of all calibration, testing, and
recharging.
The AutoRAE 2 is a flexible, modular system that can be configured to meet your calibration
requirements effectively and efficiently. An AutoRAE 2 system can be as simple as a single
cradle deployed in standalone mode to calibrate one instrument at a time, or as powerful as a
networked, controller-based system supporting ten monitors and five distinct calibration gas
cylinders.
Key features
Automatic testing, calibration, charging, and reports management
l
Deployable as a standalone cradle or a controller-based system with up to 10 cradles
l
Controller with a large, color LCD display
l
Up to 5 calibration gas cylinders can be connected at the same time*
l
Data storage on a standard SD card
l
Bench-top or wall-mounted use
l
Instruments supported: MultiRAE Lite (Pumped), MultiRAE, and MultiRAE Pro, MicroRAE,
l
ToxiRAE Pro, ToxiRAE Pro PID, ToxiRAE Pro LEL, and ToxiRAE Pro CO
and diffusion models), and MiniRAE Lite, MiniRAE 3000, ppbRAE 3000, and UltraRAE 3000
Unique cradle for all ToxiRAE Pro family (cradle supplied with adapters)
l
Networking capability (optional)
l
Wireless networking capability using external Wi-Fi module for AutoRAE 2 (optional)
l
* Supported only on AutoRAE 2 Controller-based systems.
AutoRAE 2
GENERAL INFORMATION
9
, QRAE 3 (pumped
2
User Manual
Advertisement
Table of Contents
