CHAPTER
17
STAND-ALONE AUTORAE 2 SET UP
Using A Stand-Alone AutoRAE 2 Cradle for Datalog Transfer, Monitor Configuration, and
Firmware Upgrades. Datalogs can be downloaded from an instrument to a computer, and
firmware updates and configuration data can be uploaded to an instrument via the USB port on
a stand-alone AutoRAE 2 Cradle. Use the included USB cable to connect the AutoRAE 2 Cradle
to a computer running Safety Suite Device Configurator (SSDC). Follow the instructions in the
Safety Suite Device Configurator (SSDC) User's Guide.
AutoRAE 2
64
User Manual