Table of Contents
Advertisement
CHAPTER
30
MAINTENANCE
Occasional cleaning of the AutoRAE 2 Controller and AutoRAE 2 cradle exterior is
recommended. Use a damp cloth (water only, no solvents or cleaners) to wipe the exterior case
and the dock area. Do not use alcohol or solvents.
Inspect the ports in the dock and the space around and between the buttons and the case. If
dirt has settled into any of these places, use a can of compressed air to blow it out.
Inspect the gas connections and make sure the tubing from gas cylinders is not damaged or
cracked.
Inspect the optical sensor(s) on cradles to make sure they are clean. Dirty optical sensors may
degrade testing performance for instruments' LED alarms, and may incorrectly cause an
instrument to fail an alarm functional test while in the cradle.
Check the filters on the air inlets often, making sure that dirt and debris do not build up and
affect performance.
Important! Never use sharp tools or solvents to dislodge small obstructions. If debris is lodged
in any portion of the AutoRAE 2 Controller or AutoRAE 2 Cradle and cannot be removed by
compressed air or soft cloth, refer it to qualified service personnel.
AutoRAE 2
132
User Manual
Advertisement
Table of Contents
