Placing Monitors In Cradles; Performing A Bump Test In A Controller - Honeywell AutoRAE 2 User Manual

Placing monitors in cradles

When you are ready to perform bump tests or calibration tests, place monitors in the cradles.
See "Placing a MultiRAE monitor in the cradle" on page 33 for more information..

Performing a bump test in a controller

The AutoRAE 2 Controller lets you perform bump tests on individual instruments or all
instruments that are cradled. A bump test can be initiated by pressing a Bump button on the
Cradle or selecting a Bump Test via the AutoRAE 2 Controller menus.
Press [Y/+], which selects "Function":
A menu is shown, with "Bump Test" at the top of the list, already selected (the triangle to the
right of the name indicates the selection):
AutoRAE 2 90 User Manual