Placing a Handheld PID monitor in the cradle
You must remove the inlet probe before placing a handheld PID instrument (MiniRAE Lite,
MiniRAE 3000, ppbRAE 3000, or UltraRAE 3000) into the cradle. If the instrument does not
have a Quick Connector (P/N: T02-3301-000) already installed, you must install one.
Installing a quick connector
MiniRAE Lite, MiniRAE 3000, or ppbRAE 3000:
To remove the inlet:
1. Press down on the collar of the Quick Connector base.
2. Lift the inlet probe off of the base.
AutoRAE 2
38
UltraRAE 3000:
User Manual