Loading Factory Defaults; Select A Default Configuration; Exit Programming Mode; Upgrade Lyric Controller Firmware - Honeywell Lyric LCP500-LC Installation And Reference Manual

Loading Factory Defaults

Loading Factory Defaults Loading Factory Defaults Loading Factory Defaults
To load the factory defaults, enter the Installer Programming Mode and advance to second page of the System
Programming and refer to following procedure. Refer to the Programming Default Values section of this manual
to view the Default Values.
If a default configuration is loaded, any data that has already been programmed into the system If a defa ult configuration is loaded, any data that has already been programmed into the system
If a defa If a defa ult configuration is loaded, any data that has already been programmed into the system ult configuration is loaded, any data that has already been programmed into the system
will be changed according to the default configuration selected! will be changed according to the default configuration selected! will be changed according to the default configuration selected! will be changed according to the default configuration selected!

Select a Default Configuration

Select a Default Configuration Select a Default Configuration Select a Default Configuration
SCREEN SCREEN
SCREEN SCREEN
System Programming...
Default Config
Reset Master Code
RF Keypad
Exit Program Exit Programming ming Mode
Exit Exit Program Program ming ming
1. Select the " " key to exit the current screen.
2. Select the " " key again to return to the Security Screen
3. Select the " " key again OR select the Home button to return to the Home Screen.

Upgrade Lyric Controller Firmware

Upgrade Lyric Controller Firmware
Upgrade Lyric Controller Firmware Upgrade Lyric Controller Firmware
1. Enter Installer Programming mode, then select "Update Firmware".
After a brief delay, if an update is available, a popup screen is displayed.
2.
3. Select "Yes" to update the Lyric Controller Firmware, "No" to cancel the update or "Postpone" to delay the
download for six hours.
NOTE: If "Postpone" is selected, the popup screen will be displayed again in six hours.
Mechanics of Programming (Continu Mechanics of Programming
Mechanics of Programming Mechanics of Programming
Z-Wave
Language
lyric-039-V1
Mode
Mode Mode
Lyric Controller Installation and Reference Guide
1. Select "Default Config".
Note: For a list of the pre-programmed defaults refer to Note: Note: Note:
the Programming Default Values section.
2. A Confirmation screen is displayed.
3. If "Yes" is selected, the System beeps three times and
returns to the Default option screen.
4. If "No" is selected, the System returns to the Default
option screen.
- 19 -
(Continued)
(Continu (Continu
ACTION ACTION
ACTION ACTION
ed)
ed) ed)