Status Display - Optex REDSCAN mini-Pro Series Settings Manual

RLS-2020V 1.x.x (xxxx/xx/xx)
Num X (mm) Y(mm) Size (mm)
002 -01203 02704 00284
001 -00939 01392 00248
000 -00864 00125 00110
settings
RLS-2020V 1.x.x (xxxx/xx/xx)
Num X (mm) Y(mm) Size (mm)
002 -01203 02704 00284
001 -00939 01392 00248
000 -00864 00125 00110
settings
?
Profile
1
?
Input status
Input 1 N.O.
Input 2 N.O.
Output status
Output 1 N.C.
Output 2 N.C.
Output 3 N.C.
Output 4 N.C.
Output 5 N.C.
Output 6 N.C.
Alarm status
A1
Event code status
RLS126 TA
Detector status
Normal operation
Window status
Window soiling 0%
Profile
1
Personal figure; who is logged in.
Guide; Click to open the separate window.

Status display

Click to display the status.
Switch the profile displayed
Snap shot
Profile
1
2-2. Status display
Input status [ N.C., N.O. ]
Current input is shown in red.
Output status [ N.C., N.O. ]
Current output is shown in red.
Status display
Click to slide open/close.
Alarm status
Current alarm status is shown in red.
Event code status
All the codes (R.E.C. = REDSCAN Event Code)
that currently output are listed.
R.E.C. (REDSCAN Event Code)
A1, A11, A12 ......: Zone alarm
AM: Anti-Masking
DQ: Environmental Disqualification
MO: Master Alarm
TA: Tamper Output
Detector status
[ Normal operation, Hardware error, Over heat
Camera error, Others error ]
Window status
The dirt rate of the window is displayed in %.
11
2. Display
?
Recording Start/Stop
Full screen
AR: Anti-Rotation
DM: Device Monitoring
SO: Soiling
TR: Device Trouble