Table of Contents
Advertisement
Angle Adjustment
A fine angle adjustment with LAC-1
Adjust the position of laser path with LAC-1 which provides
LED and sound when it receives infrared beams to secure
required detection area.
< HINTS >
3 LEDs indicate detection area sensitivity independently
to locate high sensitive area precisely.
Example 1: Confirmation of both ends of
the detection area
Example 3: Confirmation of each area direction
1.
Instruct a person hold the LAC-1 and stand at either side edge of
required protection area.
2.
The person should hold LAC-1 in front of their body between shoulder
and hip line.
3.
Adjust the position of laser beams by moving the main unit slowly
so that LAC-1 blinks.
If one of 3 LEDs is blinking quickly, it is detecting the laser
but the others are not detecting.
If all 3 LEDs are blinking quickly, all are detecting the laser.
Example 2: Confirmation within the detection area
6
1. Initial configuration
Shoulder
LAC-1
Hip line
Advertisement
Table of Contents
