Table of Contents
Advertisement
RLS-2020V 1.x.x (xxxx/xx/xx)
Apply settings
Detection range
RS-485
Detection profile 1
Detection profile 2
Baud rate (bps)
Event code
Data
View
Date and Time
Parity
Network
Stop bit
TCP/IP Basic
TCP/IP advanced
SNMP
RS-485
Maintenance
Information
RLS-2020V 1.x.x (xxxx/xx/xx)
Apply settings
Detection range
System
Detection profile 1
Detection profile 2
Reboot
Event code
Reboot
View
Factory reset
Date and Time
Network
Keep network settings
Maintenance
System
Logs
Firmware update
Import/Export
Select firmware file...
Information
Update firmware
Language
Select language
Apply
Firmware update:
The set parameters will be inherited even after the update.
Version up;
The set parameters will
Version down;
All settings will
Save
115200
8 bits
None
1 bit
Terminating resistor
Clear network settings
English
not
return
to factory defaults.
?
4-7-4. RS-485
Baud rate (bps)
[ 9600, 19200, 38400, 57600, 115200, 230400 ]
Data (bits)
Parity
[ None, Even, Odd ]
Stop bit (bits)
Terminator
?
4-8. Maintenance
4-8-1. System
Reboot
Perform a reboot
Factory reset
Keep network settings:
restore to the default settings except network settings
Clear network settings:
restore to the factory default with all settings
Firmware update
Select firmware file:
open the separate window to select the file
Update firmware:
start update using the selected file
Language
Select language
[ English (Default), Français, Deutsche, Italiano,
Español, Portugés Brasil, 中文 , 日本語 ]
Apply
be inherited after the update.
36
[ 7, 8 ]
[ 1, 2 ]
[ OFF、ON ]
4. Settings
Advertisement
Table of Contents
