DFI RC300H-CS111 User Manual page 46

Serial Port Console Redirection
This section configures settings relevant to serial port console redirection.
Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.
Advanced
COM1
Console Redirection [Enabled]
Console Redirection Settings

COM2
Console Redirection [Enabled]
Console Redirection Settings

COM3
Console Redirection [Enabled]
Console Redirection Settings

COM4
Console Redirection [Enabled]
Console Redirection Settings

Version 2.20.1275. Copyright (C) 2021 American Megatrends, Inc.
Console Redirection
This field is used to enable or disable the console redirection function. When
console redirection is set to enabled, console redirection settings are available as
instructed below.
RC300-CS
► Console Redirection Settings
The settings specify how
the host computer and the
remote computer (which
the user is using) will ex-
change data. Both comput-
ers should have the same
or compatible settings.
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
46
Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.
Advanced
COM1
Console Redirection Settings
Terminal Type [VT100+]
Bits per second [115200]
Data Bits
[8]
Parity [None]
Stop Bits [1]
Flow Control [None]
Version 2.20.1275. Copyright (C) 2021 American Megatrends, Inc.
Terminal Type
Select terminal type: VT100, VT100+, VT-UTF8 or ANSI.
Bits per second
Select serial port transmission speed: 9600, 19200, 38400, 57600 or 115200.
Data Bits
Select data bits: 7 bits or 8 bits.
Parity
Select parity bits: None, Even, Odd, Mark or Space.
Stop Bits
Select stop bits: 1 bit or 2 bits.
Flow Control
Select flow control: None or Hardware RTS/CTS.
Emulation: ANSI:
Extended ASCII char set.
VT100: ASCII char set.
VT100+: Extends VT100
to support color, function
keys, etc. VT-UTF8: Uses
UTF8 encoding to map
Unicode chars onto 1 or
more bytes.
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
www.dfi.com