DFI RC300H-CS111 User Manual page 50

► PEG Port Feature Configuration
This section configures the PEG port.
Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.
Chipset
PEG Port Feature Configuration
Detect Non-Compliance Device [Disabled]
Version 2.20.1275. Copyright (C) 2021 American Megatrends, Inc.
Detect Non-Compliance Device
Enable or disable this field to detect non-compliance PCIe devices in the PEG.
Version 2.20.1275. Copyright (C) 2021 American Megatrends, Inc.
RC300-CS
PCH-IO Configuration
Detect Non-Compliance
PCI Express Device
in PEG
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
50
Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.
Chipset
PCH-IO Configuration
PCI Express Configuration

SATA And RST Configuration

HD Audio Configuration

[Enabled]
LAN1(I219)
[Enabled]
Wake on LAN Enable
[Disabled]
Above 4GB MMIO BIOS assignment
[Dynamic]
Max TOLUD
Version 2.20.1275. Copyright (C) 2021 American Megatrends, Inc.
► PCI Express Configuration
Please refer to the following pages.
► SATA And RST Configuration
Please refer to the following pages.
► HD Audio Configuration
Please refer to the following pages.
LAN1(I219)
Enable or disable onboard NIC.
Wake on LAN Enable
Enable or disable integrated LAN to wake the system.
Above 4GB MMIO BIOS assignment
Switch MemoryMappedIO BIOS assignment above 4GB.
Max TOLUD
Assign a value or set "Dynamic" to automatically adjust TOLUD based on largest
MMIO length.
PCI Express Configuration
settings
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
www.dfi.com