DFI RC300H-CS111 User Manual page 45

NCT6116D HW Monitor
This section displays the hardware health monitor.
Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.
Advanced
Pc Health Status
Smart Fan Function

[Disabled]
Case Open
: +29
System temperature
: +36
CPU temperature
: N/A
SYS_FAN1 Speed
: 2626 RPM
CPU_FAN Speed
: +3.072 V
VBAT
: +0.864 V
VCORE
: +1.200 V
VDDQ
: +5.116 V
5V
: +12.056 V
+12V
Version 2.20.1275. Copyright (C) 2021 American Megatrends, Inc.
► Smart Fan Function
Please refer to the following pages.
Case Open
Enable or disable the case open detection function.
RC300-CS
Smart Fan function
setting
o C
C
o
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
► Smart Fan Function
Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.
Advanced
Pc Health Status
CPU Smart Fan Control
Boundary 1
Boundary 2
Boundary 3
Boundary 4
Speed Count 1
Speed Count 2
Speed Count 3
Speed Count 4
System Smart Fan(1) Control
Boundary 1
Boundary 2
Boundary 3
Boundary 4
Speed Count 1
Speed Count 2
Speed Count 3
Speed Count 4
Version 2.20.1275. Copyright (C) 2021 American Megatrends, Inc.
Smart Fan Control
Enable or disable the smart fan.
Boundary 1 to Boundary 4
Set the boundary temperatures that determine the fan speeds accordingly, the
value ranging from 0-127C. For example, when the system temperature reaches
Boundary 1 setting, the fan speed will be turned up to the designated speed of
the Fan Speed Count 1 field.
Speed Count 1 to Speed Count 4
Set the fan speed, the value ranging from 1-100%, 100% being full speed.
The fans will operate according to the specified boundary temperatures above-
mentioned.
45
CPU smart Fan Mode
select
[Enabled]
30
40
50
60
35
60
80
100
[Enabled]
Select Screen
30 →←:
Select Item
40 ↑↓:
Enter: Select
50
+/ - : Change Opt.
60
F1: General Help
35
F2: Previous Values
60
F9: Optimized Defaults
80
F10: Save & Exit
100
ESC: Exit
www.dfi.com