Chipset - DFI RC300H-CS111 User Manual

Chipset

This section configures relevant chipset functions.
Graphics Configuration
This section is used to configure the Network Stack settings.
Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.
Chipset
Graphics Configuration
[Auto]
Primary Display
[Auto]
Internal Graphics
Version 2.20.1275. Copyright (C) 2021 American Megatrends, Inc.
Primary Display
Select a Graphics device to be the primary display — Auto, IGFX, SG
Please choose SG for MXM vendor applications. (Switchable Graphics =
Optimus)
Internal Graphics
Keep IGFX enabled based on the setup options.
RC300-CS
Initial priority :
AUTO: PEG->PCIe-
>PCI->IGFX
IGFX: IGFX->PEG-
>PCIe->PCI
PEG: PEG->PCIe-
>PCI->IGFX
PCI: PCI->PCIe->PEG-
>IFGX
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
49
PEG Port Configuration
Configure the internal MXM3.1-B.
Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.
Chipset
PEG Port Configuration
x16
MXM3.1-B
Enable Root Port [Enabled]
[Auto]
Max Link Speed
► PEG Port Feature Configuration
Version 2.20.1275. Copyright (C) 2021 American Megatrends, Inc.
Enable Root Port
Enable or disable the root port.
Max Link Speed
Configure Max Link Speed: Auto, Gen1, Gen2 or Gen3.
Enable or Disable the
Root Port
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
www.dfi.com