Table of Contents
Advertisement
dummyhead
BF175D/BF200D/BF225D/BF250D
SHIFT CONTROL CABLE CONNECTION (Mechanical
model only)
• Before connecting the shift control cable, check that the cable is
connected to the remote control box side properly.
1. Move the remote control lever [1] fully to the "F" (Forward) side
[2].
Return the lever to the "N" (Neutral) position [3] slowly.
2. With the lever returned to the "N" (Neutral) position, mark a mark
(A) [4] at the cable outer seal end [5] on the inner cable [6].
3. Move the remote control lever fully to the "R" (Reverse) side [1].
Return the lever to the "N" (Neutral) position [2] slowly.
4. With the lever returned to the "N" (Neutral) position, make a mark
(B) [3] on the cable outer seal end of the inner cable.
5. Make a mark (C) [1] at the mid point between the mark (A) [2]
and mark (B) [3] on the inner cable.
6. Align mark (C) [1] with the cable outer seal end.
22
[1]
[6]
[4]
[5]
[1]
[3]
[1]
[3]
[2]
[1]
[3]
[2]
[2]
Advertisement
Table of Contents
