Table of Contents
Advertisement
dummyhead
BF175D/BF200D/BF225D/BF250D
Connect the drop cable (DBW model) connector [1] or indicator
cable (Mechanical model) connector [1] to the main harness
connector [2].
Install the connector onto the connector bracket [3].
Route the interface cable [1] in the engine under case.
Remove the connector suspension [1] from the stays and remove
the dummy connector [2] from the main harness connector [3].
Connect the interface cable connector [4] to the main harness
connector, set the connector into the suspension and install the
suspension onto the stays.
18
DBW model shown:
[2]
[3]
[1]
[4]
[3]
[1]
[1]
[2]
Advertisement
Table of Contents
