dummyhead
BF175D/BF200D/BF225D/BF250D
Install the interface cable [1] into the harness clip [2] and route it in
[1]
the electric parts case [3].
[2]
[1]
[3]
Install the wire harness clip [1] onto the fuel tube stay.
[3]
Secure the interface cable [2] and drop cable (DBW model) [3] or
indicator cable (Mechanical model) [3] with the wire harness clip on
the fuel tube stay.
[2]
[1]
Mechanical model only:
Install the remote control cable plate [1] onto the shift link guide [2]
by aligning the holes with the studs.
[1]
[2]
19