Table of Contents
Advertisement
dummyhead
BF175D/BF200D/BF225D/BF250D
Mechanical model only:
Set the lock plate [1] on the throttle pivot (White) [2] and install them
onto the throttle control cable [3].
Install the shift pivot (Black) assembly [4] onto the shift control cable
end [5].
Set the starter cables [1] and fuel tube A [2] into the under case
grommet [3].
Set the interface cable [4] and drop cable (DBW model) [5] or
indicator cable (Mechanical model) [5] into the under case grommet.
Mechanical model only: Set the shift control cable [6] and throttle
control cable [7] into the under case grommet.
Install the under case grommet [1] into the engine under case [2] by
aligning the groove [3] with the tab [4].
• Be careful not to press the fuel tube A with the under case
grommet A.
20
[2]
[1]
[4]
[5]
DBW model:
Mechanical model:
[3]
[4]
[4]
[5]
[1]
[1]
[2]
[2]
[4]
[3]
[7]
[6]
[3]
[5]
[2]
[1]
[3]
Advertisement
Table of Contents
