Table of Contents
Advertisement
Sending Faxes
1
Place the original.
2
On the control panel, press [Fax] in the [Home] screen.
➠
The Fax screen appears.
3
Press
on the control panel.
If the destination setting for the previously sent fax remains, a fax may be sent to an incorrect destination.
Reset the setting before operating.
4
Specify the destination.
Enter the fax number with the numeric keys, or select the destination registered in the Address Book by
pressing [Destination].
* If the machine is connected via Private Branch Exchange (PBX), press [R] before entering the destination
with the numeric keys. If [R] is not available, you must register the R-key setting.
When [Confirm] appears
Enter the fax number again, and press [Apply].
5
Configure the original scan settings.
6
Press
on the control panel.
Faxing
You can scan a document, photo, or other printed materials (originals) with the
machine, converting it to a black and white image, and then send it.
You can also send a fax after a phone conversation.
Conversation (Manual Sending)(P. 275)
Placing Originals(P. 135)
Specifying Destinations(P. 178)
273
[Home] Screen(P. 116)
Fax Original Scan Settings(P. 281)
8WFY-05L
Sending a Fax after a Phone
[R-Key Setting](P. 489)
Advertisement
Table of Contents
