Table of Contents
Advertisement
Sending Faxes from a Computer (PC Faxing)
This section describes the general procedure for this operation. Check the manual of the application you are using for
detailed operations on how to use it.
Required Preparations
●
Install the fax driver to the computer and configure the settings according to your usage environment and
purpose.
Preparing to Send Faxes from a Computer(P. 263)
When Using Windows(P. 277)
When Using macOS(P. 278)
◼
When Using Windows
1
Open the document you are sending on your computer.
2
In the application used to open the document, select the command to print.
3
Select the fax driver of the machine, and click [Print].
➠
The [Fax Sending Settings] screen of the fax driver appears.
4
Specify a destination.
●
This section describes how to enter a fax number. You can specify a destination registered to the Address
Book from the [Select Destination] tab.
●
If an outside line number is required, enter this number before the fax number. If the outside line number
has been set in advance, you do not need to enter it here.
When Entering One Fax Number
On the [Enter Destination] tab, enter a fax number. When [Confirm Fax Number] can be entered, enter the
same fax number.
You can send a document as a fax from a computer using a fax driver.
As it is easy to send a document, be sure to thoroughly check the item you are
sending beforehand.
Step 2: Configuring the Settings for Secure Sending(P. 263)
Faxing
Securely Sending PC Faxes(P. 280)
277
8WFY-05S
Advertisement
Table of Contents
