Connecting To A Wired Lan - Canon MF264dw II User Manual

Connecting to a Wired LAN

Connect a computer to the machine via a router. Use an Ethernet cable to connect the machine to the router.
1
Connect an Ethernet cable to the machine and router.
Insert the connector all the way into the port until it clicks in place.
2
Wait a few minutes.
➠
By default, the IP address is set automatically.
To use a specific IP address, set this manually.
Setting IPv4 Addresses(P. 73)
Setting IPv6 Addresses(P. 77)
Setting Up
56
8WFY-01C