Table of Contents
Advertisement
Scanning (Sending by E-mail)
Required Preparations
●
On the machine, configure the settings of the e-mail server to be used to send e-mail.
Scanned Data by E-mail(P. 231)
1
Place the original.
2
On the control panel, press [Scan] in the [Home] screen.
➠
The scan type selection screen is displayed.
3
Press [E-Mail].
➠
The scan screen is displayed.
4
Specify the destination.
Use [Specify from Address Book] or [Specify from Coded Dial] to specify the Cc and Bcc destinations.
5
Configure the scan settings.
●
You can also set the subject and main body of the e-mail on this screen.
●
Scanned data is sent with the following file name. You can also specify a custom string and add it to the start.
Setting File / Division(P. 255)
Scanning
You can scan an original and send the scanned data by e-mail as an attachment.
Just like when sending a regular e-mail, you can add a subject and message and
specify multiple destinations.
Placing Originals(P. 135)
Specifying Destinations(P. 178)
Scan Settings (Touch Panel Model)(P. 254)
243
Preparing to Send
[Home] Screen(P. 116)
E-mail Settings(P. 256)
8WFY-051
Advertisement
Table of Contents
