Table of Contents
Advertisement
Fax Original Scan Settings
When sending a fax using the machine, you can adjust the image quality.
If the recipient cannot read the text or the sent fax was not as intended, the settings can be adjusted and the fax
resent.
Adjusting Image Quality(P. 281)
Registering the Frequently Used Scan Settings as the Default Settings
●
You can change the default settings for scanning fax originals according to the frequently used scan
settings.
Changing the Default Settings(P. 186)
Recalling Past Settings (TX Job Log)
●
You can use the TX Job Log to recall the settings used to send faxes in the past.
(TX Job Log)(P. 185)
Adjusting Image Quality
You can adjust the image quality such as when the fax image is not clear or the text is difficult to read.
[Resolution]
Select the resolution for scanning originals.
The higher the resolution, the sharper the image, but the longer it takes to send the data.
[Density]
Adjust the density to suit the original.
Press [+] to increase the density and [-] to lower it.
[Sharpness]
Adjust the sharpness.
Emphasize the contours and lines to make them clearer, or weaken them to make them softer.
Adjustment example:
●
To make blurry text or shapes clearer
Press [+].
●
To reduce moire (vertical pattern noise) in photos
Faxing
281
8WFY-05W
Specifying Destinations
Advertisement
Table of Contents
