[Security Settings]
Specify and manage security settings such as the machine's authentication functions and system verification.
* Values in bold red text are the default settings for each item.
[Authentication/Password Settings](P. 509)
[Encryption Settings](P. 509)
[Verify System at Startup](P. 509)
[Authentication/Password Settings]
[Menu]
[Management Settings]
Configure the authentication functions for the machine.
[Authentication/Password Settings](P. 510)
[Encryption Settings]
[Menu]
[Management Settings]
Specify whether to restrict the use of weak encryption or keys and certificates that use weak encryption.
[Prohibit Use of Weak Encryption]
[Off]
[On]
[Prohibit Key/Cert. with Weak Encryption]
[Off]
[On]
*1
May not be displayed or available depending on the model, the installed options, and other settings.
[Verify System at Startup]
[Menu]
[Management Settings]
Verify that the system when starting up the machine.
If Tampering is Detected
●
The machine switches to update standby mode. You need to update the firmware.
Updating the Firmware (Touch Panel Model)(P. 410)
Updating the Firmware (5 Lines LCD Model)(P. 413)
●
If the screen remains blank after some time, system recovery may not be possible. Contact your dealer or
service representative.
[Off]
[On]
Settings Menu Items
[Security Settings]
[Security Settings]
*1
[Security Settings]
If the Problem Persists(P. 645)
509
8WFY-0A8