Cannot Access Remote Ui Or Send Function Setting Tool - Canon MF264dw II User Manual

Cannot Access Remote UI or Send Function Setting Tool

If the message [Cannot access Remote UI.] or [Cannot continue the settings because the function to perform settings
for the device is restricted.] appears and you cannot access Remote UI or Send Function Setting Tool, troubleshoot by
checking the items below.
Set the Remote UI Access PIN.
To access the Remote UI and Send Function Setting Tool, you must set the Remote UI Access PIN.
Administrator privileges are required to configure the setting.
Touch Panel Model
[Home] screen on the control panel
Firmware] [Remote UI Settings]
enter the PIN again
5 Lines LCD Model
on the control panel
Firmware]
[On]
* You cannot set a PIN consisting of all zeros, such as "00" or "0000000."
Change the System Manager PIN.
When logging in with System Manager Mode, you must change the System Manager PIN from the default
settings.
Administrator privileges are required to change the settings.
Touch Panel Model
[Home] screen on the control panel
Manager Information Settings]
enter the PIN
5 Lines LCD Model
on the control panel
Manager Information Settings]
Manager ID
* You cannot set a System Manager ID or PIN consisting of all zeros, such as "00" or "0000000."
* Only allow certain administrators to have access to the System Manager ID and PIN after the settings are
changed.
Troubleshooting
[Menu]
[Remote UI Access Security Settings]
[Apply]
[Management Settings]
[Remote UI Settings]
enter the PIN
[Menu]
[System Manager ID and PIN]
[Apply] enter the PIN again
[Management Settings]
enter the PIN
[Management Settings]
[Remote UI Settings/Update
[Remote UI Access Security Settings]
enter the PIN again
[Management Settings]
enter the System Manager ID
[Apply]
[User Management]
[System Manager ID and PIN]
enter the PIN again
615
8WFY-0F4
[Remote UI Settings/Update
[On] enter the PIN
[User Management] [System
[Apply]
[System
enter the System
[Apply]