Canon MF264dw II User Manual page 479

Hide thumbs Also See for MF264dw II:

Table of Contents

To bind the paper on the short edge, specify [Short Edge] in this setting.

[Short Edge]

[Function Settings]

Offset the print position to adjust the width of the margin that will form the gutter.

Specify the offset width in 0.5 mm increments in the plus (+) or minus (-) offset direction, in accordance with the

edge specified in [Binding Location].

If [Binding Location] is set to [Long Edge]

Specify the offset width by selecting a positive (+) value to bind on the left edge of the paper or a negative (-)

value to bind on the right edge.

Specified as a positive (+) value

If [Binding Location] is set to [Short Edge]

Specify the offset width by selecting a positive (+) value to bind on the top edge of the paper or a negative (-)

value to bind on the bottom edge.

Specified as a positive (+) value

to +50.0 (mm)

[Offset Short Edge] or [Offset Long Edge]

[Function Settings]

Offset the print position of text and images. Use this setting when the printed text and images are shifted

towards one edge of the paper or when they extend beyond the print range.

Specify the offset width as a positive (+) or negative (-) value in 0.5 mm increments for each paper edge

direction and print side.

To Offset Along the Short Edge (Horizontally)

Specify the adjustment width by selecting a positive (+) value to adjust to the right on the paper or a negative

(-) value to adjust to the left on the paper.

To Offset Along the Long Edge (Vertically)

Settings Menu Items

[Printer Settings]

[Binding Location](P. 469)

Specified as a negative (-) value

[Printer Settings]