Appendix; Docking Station Setup; Connecting To Pc - Atlas Copco Tensor STB User Manual

6

Appendix

6.1

Docking station setup

Tensor STB docking station only works with Tensor STB33/STB63 tools and later.
The following equipment is needed.
 PC with at least Windows 2000.
 Tensor STB docking station with accessories.
 ToolsTalk Service software stored locally on your PC.
6.1.1

Connecting to PC

Hardware setup
1. Connect the power supply to the Tensor STB docking station.
2. Connect the Tensor STB docking station to the PC using the USB cable.
The
Found New Hardware Wizard
This may look different depending on the version of Windows being used.
Figure 26 Found New Hardware Wizard, first screen
3. Select
No, not this time
9836 3043 01
is displayed.
, and click .
Next
Appendix
27 (36)