GE Innova IGS 520 Preinstallation Manual page 208

2.1.2 System Core Matrix
For a description of how to use the following cable group schematics, see below:
Cable length data is as follows:
•
Cable Length = the total cable length, connector to connector (example above is 18/24
meters).
•
X + Y = used length for connection within system (example above is 4.3 meters).
•
Cable Length - (X + Y) = available length for conduit run (example above is 13.7 or 19.7
meters).
208
Innova IGS 520, Innova
TM
NOTICE
All lengths of cable are:
•
in useable meter when you look at group level, or
• in meters (connector to connector) when you look at the cable level.
Illustration 5-5: Example of cable group schematic
IGS 530, Innova IGS 540 Pre-Installation Manual
TM TM
Direction 5499972-1-1EN, Revision 2
2 System Cable Information