Vivid E9 Diagnostic Ultrasound System Option - GE Innova IGS 520 Preinstallation Manual

•
ECG devices installed in Control Room (GE ECG devices like MacLab, CardioLab or
ComboLab)
•
ECG devices installed in Exam Room (Non-GE ECG device)

1.2.16 Vivid E9 Diagnostic Ultrasound System Option

The VIVID E9 ultrasound unit is a high performance digital ultrasound imaging system with total
data management.
It is installed in the vascular Patient Room's environment as the clinical procedure requires.
After the procedure is completed, it might be moved out of the room for other application
purposes.
The system provides image generation in 4D, 2D (B) Mode, Color Doppler, Power Doppler
(Angio), MMode, Color M-Mode, PW and CW Doppler spectra, Tissue Velocity imaging,
Advanced Strain and Contrast applications. The fully digital architecture of the VIVID E9 unit
allows optimal usage of all scanning modes and probe types, throughout the full spectrum of
operating frequencies.
The Signal runs from the Probe Connector Panel to the Front End, then over to the Back End
Processor and finally to the monitor and peripherals.
System configuration is stored on the hard drive in the Back End Processor. All necessary
software is loaded from the hard drive on power up.
70
Innova IGS 520, Innova
TM
Illustration 2-19: ECG Acquisition kit layout
IGS 530, Innova IGS 540 Pre-Installation Manual
TM TM
Direction 5499972-1-1EN, Revision 2
1 System Components