Table of Contents
Advertisement
Wall Mount 2-Way RF Compact Color Touchpanel
Pushbutton Layout and Join
Number Assignment
22 • Wall Mount 2-Way RF Compact Color Touchpanel: STX-1700CW
Optional Pushbuttons
If the optional ten "hard" pushbuttons are installed, you can use these buttons to
access any frequently used commands (refer to "Appendix B: Installation of
Optional Pushbuttons"). Each button has a permanently fixed digital join number;
refer to the illustration shown to the left. The sequence of digital join numbers is (top
to bottom) 1 through 5 on the left side and 6 through 10 on the right side.
NOTE: A user may not want the display to come on after a pushbutton is pressed
when the unit is off. The Startup Preference option allows the user to select whether
the touchpanel's display comes on or stays off after a pushbutton is pressed. For
more information, refer to "Startup Preference" on page 14.
NOTE: To program a quick pushbutton to flip a page (change a screen) on the
STX-1700CW, go to the Hard Keys tab of the "Project Properties" window in
VT Pro-e. Select a button from the Button drop-down list, and then select the desired
page from the Page Flip drop-down list. When the button is pressed, the page is
displayed.
The quick pushbuttons can also be programmed to do a page flip via SIMPL
Windows.
Reserved Join Numbers
A reserved join number is a feature of the software that enables a designer to create a
button that completes a predetermined function. The tables on the next page provide
lists of reserved join numbers available within the VT Pro-e software.
NOTE: Many touchpanel configuration "shortcuts" are available via the software. A
button can be created on a page that either calls up the Preferences Menu, adjusts
brightness, etc., via reserved join numbers.
Crestron STX-1700CW
Operations Guide – DOC. 6228A
Advertisement
Table of Contents
