Uploading A Vt Pro-E Project - Crestron STX-1700CW Operation Manual

Wall Mount 2-Way RF Compact Color Touchpanel
A compiled VT Pro-e file has the
extension .vtz
28 • Wall Mount 2-Way RF Compact Color Touchpanel: STX-1700CW
8. Proceed to "Uploading a VT Pro-e Project" below, or to "Firmware
Upgrade" that begins on page 29 as appropriate.

Uploading a VT Pro-e Project

To upload a compiled VT Pro-e project to the STX-1700CW, complete the
following steps.
1. Make sure that "Communication Settings" that begins on page 24 has
been performed.
2. As shown below, select File Transfer | Send Touchpanel
(alternatively, depress Alt+T) from the Viewport menu.
Select Send Touchpanel
3. As shown below, select the Net ID of the STX-1700CW and then click
OK. The "Touchpanel Transfer" window appears (refer to graphic
below).
"Select Network ID" Window
"Touchpanel Transfer" Window
Crestron STX-1700CW
Operations Guide – DOC. 6228A