Table of Contents
Advertisement
Wall Mount 2-Way RF Compact Color Touchpanel
Programming Cable Specifications
26 • Wall Mount 2-Way RF Compact Color Touchpanel: STX-1700CW
1. Before making any connections to the touchpanel, verify that the control
system is properly connected to the PC (using an RS-232 DB9 straight-
through cable, Crestron P/N CNSP-587) and powered on.
2. Attach the stereo connector end of the ST-CBL to the touchpanel.
3. Attach the network connector end of the ST-CBL to the connector
labeled NET on the control system.
4. Attach the appropriate external power pack or equivalent to touchpanel
and plug into outlet. At the PC, make sure that no programs accessing
the COM port of the PC are running.
5. Open the Crestron Viewport.
Either launch the stand-alone version of Viewport, or start SIMPL
Windows or VT Pro-e, and from the menu bar, select Tools | Viewport.
6. From the Viewport menu, select Setup | Communications settings
(alternatively, press Alt+D) to open the "Port Settings" window. Refer
to the figures on the next page.
Crestron STX-1700CW
Operations Guide – DOC. 6228A
Advertisement
Table of Contents
