Table of Contents
Advertisement
Wall Mount 2-Way RF Compact Color Touchpanel
8 • Wall Mount 2-Way RF Compact Color Touchpanel: STX-1700CW
Remove STX-1700CW
Manual Undocking of Touchpanel
The STX-1700CW can be undocked manually. The only tool required is a long-reach
(minimum 4-1/2 inches from tip to handle base) #1 flat or Phillips screwdriver.
1. Refer to the diagram below. At top-center of the front panel, remove the
manual unlatch access plug from the access hole.
Remove Access Hole Plug
2. As shown in the following diagram, insert a long-reach screwdriver into
the access hole at a downward angle (approximately 10
the screwdriver contacts the manual unlatch tab.
Crestron STX-1700CW
o
) until the tip of
Operations Guide – DOC. 6228A
Advertisement
Table of Contents
