Table of Contents
Advertisement
®
Isys
Wired 5.7 Inch Tabletop Touchpanel
Pushbutton Layout and Join
Number Assignment
®
16 • Isys
Wired 5.7 Inch Tabletop Touchpanel: TPS-1700
VT Pro-e touchpanel files and SIMPL Windows files that illustrate the high-
performance capabilities of multi-mode objects.
Optional Pushbuttons
If the optional ten "hard" pushbuttons are installed, you can use these buttons to
access any frequently used commands (refer to "Appendix: Installation of Optional
Pushbuttons"). Each button has a permanently fixed digital join number; refer to the
illustration shown to the left. The sequence of digital join numbers is (top to bottom)
1 through 5 on the left side and 6 through 10 on the right side.
NOTE: A user may not want the display to come on after a pushbutton is pressed
when the unit is off. The Startup Preference option allows the user to select whether
the touchpanel's display comes on or stays off after a pushbutton is pressed. For
more information, refer to "Startup Preference" on page 8.
NOTE: To program a quick pushbutton to flip a page (change a screen) on the
TPS-1700, go to the Hard Keys tab of the "Project Properties" window in VT Pro-e.
Select a button from the Button drop-down list, and then select the desired page from
the Page Flip drop-down list. When the button is pressed, the page is displayed.
The quick pushbuttons can also be programmed to do a page flip via SIMPL
Windows.
Reserved Join Numbers
A reserved join number is a feature of the software that enables a designer to create a
button that completes a predetermined function. The tables below and on the next
page provide lists of reserved join numbers available within the software.
NOTE: Many touchpanel configuration "shortcuts" are available via the software.
A button can be created on a page that either calls up the Preferences Menu, adjusts
brightness, etc., via reserved join numbers.
Analog Reserved Join Numbers for TPS-1700
JOIN NUMBER
17201
LCD Brightness
17203
Standby Timeout
17300
Key Click Volume
1
Defaults:
LCD Brightness – 50%
Power Timeout – 30 minutes
2
"I" indicates that pressing a button with this join number commands the touchpanel to perform the
function. "O" indicates feedback to the display (all actions are local to the touchpanel, no
information is transmitted).
NOTE: Standby Timeout adjusts in 1-minute increments from 1 to 10 minutes, and
in ten-minute increments from 20-120 minutes.
FUNCTION
VALUE
1
1-100%
1
0-120 minutes
1
0-120 minutes
Standby Timeout – 10 minutes
Key Click Volume – 50%
Operations Guide - DOC. 6223A
Crestron TPS-1700
2
DIRECTION
I/O
I/O
I/O
Advertisement
Table of Contents
