Quick" Pushbuttons; Reserved Join Numbers - Crestron TPS-2000L Operation Manual

5 Inch Lectern/Wall Mount Touchpanel
Pushbutton Layout and Join
Number Assignment
1 6
2 7
3 8
4 9
5 10
26 • 5 Inch Lectern/Wall Mount Touchpanel: TPS-2000L
11. On the same page, create a button. The button can be located
anywhere on the page.
12. Access the "Button Properties" window and complete the items in
steps 13 through 16.
13. From the Text tab, assign the Text Entry (i.e., Toggle Zoom).
14. From the Select Properties field, select Digital Feedback Join.
15. Enter 17125 into the join number field. This digital join number
allows the user to switch back and forth from a 1:1 video image
and a zoomed image (2:1).
16. Select OK to close the "Button Properties" window.
17. On the same page, create a button. The button can be located
anywhere on the page.
18. Access the "Button Properties" window and complete the items in
steps 19 through 21.
19. From the Text tab, assign the Text Entry (i.e., Return).
20. From the Select Properties field, select Page Flip.
21. From the Page Flip field, select Return or choose a page from the
list. Selecting Return results in a flip back to the previous screen.
Selecting an existing page from the list forces a jump to that page.
22. Select OK to close the "Button Properties" window.

"Quick" Pushbuttons

There are 10 "quick" pushbuttons that flank the LCD display. These buttons are used
to access any frequently used commands. Each button has a permanently fixed
digital join number, refer to the illustration shown to the left. The sequence of digital
join numbers (1 through 5 on the left side and 6 through 10 on the right side) is
consistent whether the touchpanel screen orientation is set to Upright or Inverted.
NOTE: There is no access to digital join numbers 1 through 10 in VT Pro-e to
assign the panel's 10 hard buttons. Use SIMPL Windows and do a 'logical' page
flip.
NOTE: A VT Pro-e sample project, TPS-2000.VTP, is available from the
VT Pro-e section of the Crestron FTP site (ftp://ftp.crestron.com/VTPro-E/). This
project provides guides for panel designers so that they can line up objects with the
five "quick" pushbuttons that flank the LCD display. New users are required to
register in order to obtain access to the FTP site.

Reserved Join Numbers

A reserved join number is a feature of the software that enables a designer to create a
button that completes a predetermined function. The tables on the next few pages
provide lists of reserved join numbers available within the software.
NOTE: Many touchpanel configuration "shortcuts" are available via the software.
A button can be created on a page that either calls up the Preferences Menu, adjusts
brightness, etc., via reserved join numbers.

Crestron Isys TPS-2000L
Operations Guide – DOC. 5972A