Table of Contents
Advertisement
Crestron STX-1700CW
Operations Guide - DOC. 6228A
Wall Mount 2-Way RF Compact Color Touchpanel
Accessing the "Port Settings" Window
7. Select the RS-232 connection type. Verify the available COM is
selected. Verify that the baud rate is set to 115200 (PRO 2 default), the
parity is None, the data bits is Eight, the stop bits is One, XON/XOFF is
not selected, and RTS/CTS is selected. Click the OK button to save the
settings and close the window.
NOTE: If problems occur when transferring any Cresnet file (touchpanel
project/firmware), lower the port speed baud rate to 38400 to match the Cresnet bus
speed when transferring through a control system. Make sure XModem is selected
from Mode for Network Transfers.
"Port Settings" Window
Wall Mount 2-Way RF Compact Color Touchpanel: STX-1700CW • 27
Advertisement
Table of Contents
