Siemens RUGGEDCOM RSG2488 Installation Manual

Hide thumbs

Advertisement

Quick Links

Table of Contents
RUGGEDCOM RSG2488
Installation Guide
04/2018
RC1048-EN-05
Preface
Introduction
Installing the Device
Modules
Technical Specifications
Dimension Drawings
Certification
1
2
3
4
5
6

Advertisement

Table of Contents
loading

  Summary of Contents for Siemens RUGGEDCOM RSG2488

  • Page 1 Preface Introduction Installing the Device RUGGEDCOM RSG2488 Modules Technical Specifications Dimension Drawings Installation Guide Certification 04/2018 RC1048-EN-05...
  • Page 2: Security Information

    Warranty Siemens warrants this product for a period of five (5) years from the date of purchase, conditional upon the return to factory for maintenance during the warranty term. This product contains no user-serviceable parts. Attempted service by unauthorized personnel shall render all warranties null and void.
  • Page 3 RUGGEDCOM RSG2488 Installation Guide Contacting Siemens Address Telephone E-mail Siemens Canada Ltd Toll-free: 1 888 264 0006 ruggedcom.info.i-ia@siemens.com Industry Sector Tel: +1 905 856 5288 300 Applewood Crescent Fax: +1 905 856 1995 Concord, Ontario https://www.siemens.com/ruggedcom Canada, L4K 5C7...
  • Page 4 RUGGEDCOM RSG2488 Installation Guide...
  • Page 5: Table Of Contents

    RUGGEDCOM RSG2488   Installation Guide Table of Contents Table of Contents Preface ......................Alerts ..............................vii Related Documents ..........................viii Accessing Documentation ........................viii Training ............................viii Customer Support ..........................viii Chapter 1 Introduction ..................... 1.1  Feature Highlights ........................1 1.2    Description ........................... 2 Chapter 2 Installing the Device ..................
  • Page 6   RUGGEDCOM RSG2488 Table of Contents Installation Guide Chapter 3 Modules ......................3.1  Available Modules ........................22 3.2  Installing/Removing Line Modules ....................28 3.3  Installing/Removing Power Modules ..................... 30 Chapter 4 Technical Specifications .................. 4.1  Power Supply Specifications ......................33 4.2  Failsafe Alarm Relay Specifications ....................33 4.3  Supported Networking Standards ....................
  • Page 7: Preface

    Installation Guide Preface Preface This guide describes the RUGGEDCOM RSG2488. It describes the major features of the device, installation, commissioning and important technical specifications. It is intended for use by network technical support personnel who are responsible for the installation, commissioning and maintenance of the device.
  • Page 8: Related Documents

    Siemens Sales representative. Customer Support Customer support is available 24 hours, 7 days a week for all Siemens customers. For technical support or general information, contact Siemens Customer Support through any of the following methods: Online Visit http://www.siemens.com/automation/support-request...
  • Page 9 Installation Guide Preface Mobile App Install the Industry Online Support app by Siemens AG on any Android, Apple iOS or Windows mobile device and be able to: • Access Siemens' extensive library of support documentation, including FAQs and manuals • Submit SRs or check on the status of an existing SR •...
  • Page 10: Customer Support

      RUGGEDCOM RSG2488 Preface Installation Guide Customer Support...
  • Page 11: Introduction

    Introduction Introduction The RUGGEDCOM RSG2488 is a utility grade, fully managed, industrial Ethernet switch designed to operate reliably in harsh environments. With a rugged metal enclosure and an optional conformal coating, the RUGGEDCOM RSG2488 provides a high level of immunity to electromagnetic interference and heavy electrical surges, and can withstand temperatures between -40 and 85 °C (-40 and 185 °F).
  • Page 12: Description

    • Conformal coated printed circuit boards (optional) Section 1.2 Description The RUGGEDCOM RSG2488 features various ports, controls and indicator LEDs on the front panel for connecting, configuring and troubleshooting the device. Figure 1: RUGGEDCOM RSG2488 1. Front    2. Rear    3. Power Modules    4. Power Status LEDs    5. RS-232 Serial Console Port (DB9)    6. Management Port    7. Alarm Indicator LED   ...
  • Page 13: Modules

    RUGGEDCOM RSG2488 Chapter 1 Installation Guide Introduction State Description Solid Link detected Blinking Link activity No link detected Line Modules The device features slots for up to eight line modules. For more information, refer to Chapter 3, Modules. Failsafe Alarm Relay Latches to default state when a power disruption or other alarm condition occurs.
  • Page 14 Chapter 1 RUGGEDCOM RSG2488 Introduction Installation Guide Description...
  • Page 15: Installing The Device

    This product contains no user-serviceable parts. Attempted service by unauthorized personnel shall render all warranties null and void. Changes or modifications not expressly approved by Siemens Canada Ltd could invalidate specifications, test results, and agency approvals, and void the user's authority to operate the equipment.
  • Page 16: General Procedure

    Review the relevant certification information for any regulatory requirements. For more information, refer to Section 6.1, “Approvals”. Review the RUGGEDCOM RSG2488 Modules Catalog for special installation or regulatory requirements related to the modules installed in the device. In the case of Precision Time Protocol (PTP) line modules, this includes antenna installation and regulatory requirements.
  • Page 17: Protection On Twisted-Pair Data Ports

    Siemens also does not recommend using copper Ethernet ports to interface with devices in the field across distances that could produce high levels of ground potential rise (i.e. greater than 2500 V), during line-to-ground fault conditions.
  • Page 18: Mounting The Device To A Rack

    Chapter 2 RUGGEDCOM RSG2488 Installing the Device Installation Guide IMPORTANT! Heat generated by the device is channeled outwards from the enclosure. As such, it is recommended that 2.5 cm (1 in) of space be maintained on all open sides of the device to allow for some convectional airflow.
  • Page 19: Mounting The Device On A Din Rail

    RUGGEDCOM RSG2488 Chapter 2 Installation Guide Installing the Device Section 2.4.2 Mounting the Device on a DIN Rail For DIN rail installations, the RSG2488 can be ordered with panel/DIN rail adapters pre-installed on each side of the chassis. The adapters allow the device to be slid onto a standard 35 mm (1.4 in) DIN rail.
  • Page 20: Connecting The Failsafe Alarm Relay

    Chapter 2 RUGGEDCOM RSG2488 Installing the Device Installation Guide Figure 4: Panel Mounting 1. Screw    2. Panel/DIN Rail Adapter Install the supplied screws to secure the adapters to the panel. Section 2.5 Connecting the Failsafe Alarm Relay The failsafe relay can be configured to latch based on alarm conditions. The NO (Normally Open) contact is closed when the unit is powered and there are no active alarms.
  • Page 21: Grounding The Device

    Section 2.7 Connecting Power The RUGGEDCOM RSG2488 supports dual redundant AC and/or DC power supplies that can be installed in any combination. The use of two power modules is recommended to provide redundancy and load balancing. The RUGGEDCOM RSG2488 can be equipped with either a screw-type or pluggable terminal block, which provides power to both power supplies.
  • Page 22: Connecting High Ac/Dc Power

    Chapter 2 RUGGEDCOM RSG2488 Installing the Device Installation Guide DANGER! Electrocution hazard – risk of serious personal injury or death. The device may have two power supplies equipped, which may be connected to separate power sources. Make sure all power sources are off before servicing the power supply terminals.
  • Page 23: Connecting Low Dc Power

    RUGGEDCOM RSG2488 Chapter 2 Installation Guide Installing the Device CAUTION! Electrical hazard – risk of damage to equipment. Do not connect AC power cables to a DC power supply terminal block. Damage to the power supply may occur. NOTE The screw-type terminal block is installed using Phillips screws and compression plates, allowing either bare wire connections or crimped terminal lugs.
  • Page 24: Wiring Examples

    Chapter 2 RUGGEDCOM RSG2488 Installing the Device Installation Guide Figure 8: DC Terminal Block Wiring 1. Screw-Type Terminal Block for 24 and 48 Power Supply    2. Pluggable Terminal Block for 24P and 48P Power Supply    3. Positive Terminal for PS1    4. Negative Terminal for PS1    5. Positive Terminal for PS2    6. Negative Terminal for PS2    7. Chassis Ground Connect the negative wire from the power source to the negative terminal on the terminal block.
  • Page 25 RUGGEDCOM RSG2488 Chapter 2 Installation Guide Installing the Device Figure 10: Single Low DC Power Supply Figure 11: Dual High AC/DC Power Supply Wiring Examples...
  • Page 26: Inserting/Removing The Microsd Card

    Installing the Device Installation Guide Figure 12: Dual Low DC Power Supply Figure 13: High AC/DC Power Supply and Low DC Power Supply Section 2.8 Inserting/Removing the MicroSD Card The RUGGEDCOM RSG2488 accepts a microSD card for storing configuration files and/or software updates. Inserting/Removing the MicroSD Card...
  • Page 27: Connecting To The Device

    Connecting to the Device The following describes the various methods for accessing the ROS console and Web interfaces on the device. For more detailed instructions, refer to the RUGGEDCOM ROS User Guide for the RUGGEDCOM RSG2488. Serial Console and Management Ports Connect a workstation directly to the serial console or management ports to access the boot-time control and ROS interfaces.
  • Page 28: Communication Ports

    Communication Ports Connect any of the available Ethernet ports on the device to a management switch and access the ROS console and Web interfaces via the device's IP address. The factory default IP address for the RUGGEDCOM RSG2488 is https://192.168.0.2.
  • Page 29: Configuring The Device

    RUGGEDCOM RSG2488 Chapter 2 Installation Guide Installing the Device Section 2.10 Configuring the Device Once the device is installed and connected to the network, it must be configured. All configuration management is done via the RUGGEDCOM ROS interface. For more information about configuring the device, refer to the RUGGEDCOM ROS User Guide associated with the installed software release.
  • Page 30 Chapter 2 RUGGEDCOM RSG2488 Installing the Device Installation Guide Configuring the Device...
  • Page 31: Modules

    Modules Modules The RUGGEDCOM RSG2488 features slots for up to eight field-replaceable line modules, which can be used to expand and customize the capabilities of the device to suit specific applications. A variety of modules are available, each featuring a specific type of communication port: copper Ethernet, fiber optic Ethernet and Small Form-factor Pluggable (SFP).
  • Page 32: Available Modules

    Section 3.2, “Installing/Removing Line Modules” • Section 3.3, “Installing/Removing Power Modules” Section 3.1 Available Modules The following modules are available for use with the RUGGEDCOM RSG2488. For more information about individual modules, refer to the RUGGEDCOM RSG2488 Series Modules Catalog [https:// support.industry.siemens.com/cs/ca/en/view/109757282]. Power Supply Modules...
  • Page 33 RUGGEDCOM RSG2488 Chapter 3 Installation Guide Modules Copper Ethernet Modules RUGGEDCOM RMM2473-2FC Specifications Article Numbers Ports: 2 6GK6000-8CG02-2EA0 (Standard) Port Type: FastConnect RJ45 6GK6000-8CG02-2EA1 Speed: 1000 Mbps (Conformal Coated) Interface: TX Distance: 100 m (328 ft) RUGGEDCOM RMM2473-2RJ45 Specifications Article Numbers...
  • Page 34 Chapter 3 RUGGEDCOM RSG2488 Modules Installation Guide RUGGEDCOM RMM2473-4M12X Specifications Article Numbers Ports: 4 6GK6000-8CG04-4EA0 (Standard) Port Type: M12 (8-Pin, X-Coded) 6GK6000-8CG04-4EA1 Speed: 1000 Mbps (Conformal Coated) Interface: TX Distance: 100 m (328 ft) Fiber Optic Ethernet Modules RUGGEDCOM RMM2464-4ST2...
  • Page 35 RUGGEDCOM RSG2488 Chapter 3 Installation Guide Modules RUGGEDCOM RMM2465-4LC20 Specifications Article Numbers Ports: 4 6GK6000-8FX06-4EA0 (Standard) Port Type: LC 6GK6000-8FX06-4EA1 Mode: SM (Single-Mode) (Conformal Coated) Speed: 100 Mbps Interface: FX Wavelength: 1310 nm Distance: 20 km (12.4 mi) RUGGEDCOM RMM2475-4LC25...
  • Page 36 Chapter 3 RUGGEDCOM RSG2488 Modules Installation Guide Interface: LX Wavelength: 1310 nm Distance: 10 km (6.2 mi) RUGGEDCOM RMM2465-4SC20 Specifications Article Numbers Ports: 4 6GK6000-8FX05-4EA0 (Standard) Port Type: SC 6GK6000-8FX05-4EA1 Mode: SM (Single-Mode) (Conformal Coated) Speed: 100 Mbps Interface: FX Wavelength: 1310 nm Distance: 20 km (12.4 mi)
  • Page 37 RUGGEDCOM RSG2488 Chapter 3 Installation Guide Modules RUGGEDCOM RMM2475-2SFP10 Specifications Article Numbers Ports: 2 6GK6000-8FG52-2EA0 (Standard) Speed: 1000 Mbps 6GK6000-8FG52-2EA1 Interface: LX (Conformal Coated) SFP Included: RUGGEDCOM SFP1132-1LX10 RUGGEDCOM RMM2475-2SFP25 Specifications Article Numbers Ports: 2 6GK6000-8FG53-2EA0 (Standard) Speed: 1000 Mbps...
  • Page 38: Installing/Removing Line Modules

    Chapter 3 RUGGEDCOM RSG2488 Modules Installation Guide SFP Included: RUGGEDCOM SFP1132-1LX70 Refer to details for a list of compatible SFPs. Precision Time Protocol (PTP) Modules RUGGEDCOM RMM2431-5PTP Specifications Article Numbers Ports: 5 6GK6000-8PT01-4EA0 (Standard) Protocols: PTP and NTP 6GK6000-8PT01-4EA1 Synchronization Sources: NTP,...
  • Page 39: Removing A Module

    RUGGEDCOM RSG2488 Chapter 3 Installation Guide Modules Removing a Module To remove a line module, do the following: Make sure power to the device has been disconnected and wait approximately two minutes for any remaining energy to dissipate. [Optional] If the device is installed in a rack, remove it from the rack.
  • Page 40: Installing/Removing Power Modules

    Connect power to the device. Section 3.3 Installing/Removing Power Modules The RUGGEDCOM RSG2488 supports dual redundant power supply modules. CAUTION! Contamination hazard – risk of equipment damage. Prevent the ingress of water, dirts and other debris that may lead to premature equipment failure. Always make sure slots are not left empty.
  • Page 41: Installing A Power Module

    RUGGEDCOM RSG2488 Chapter 3 Installation Guide Modules Figure 20: Removing a Power Supply 1. Screws    2. Power Supply    3. Chassis Turn off power to the module. Disconnect the power supply wiring from the terminal block. Alternatively, for convenience, remove the terminal block with the wiring still connected and set it aside to be connected later to the new module.
  • Page 42 Chapter 3 RUGGEDCOM RSG2488 Modules Installation Guide Turn on power to the module and confirm the module is receiving and supplying power. This is indicated by the LEDs on the module. State Description Green The module is supplying power Green...
  • Page 43: Technical Specifications

    RUGGEDCOM RSG2488 Chapter 4 Installation Guide Technical Specifications Technical Specifications This section provides important technical specifications related to the device. CONTENTS • Section 4.1, “Power Supply Specifications” • Section 4.2, “Failsafe Alarm Relay Specifications” • Section 4.3, “Supported Networking Standards” • Section 4.4, “Operating Environment”...
  • Page 44: Supported Networking Standards

    Chapter 4 RUGGEDCOM RSG2488 Technical Specifications Installation Guide Parameter Value (Resistive Load) 30 VDC 2 A @ 250 VAC Rated Switching Current 2 A @ 30 VDC 150 W Maximum Switching Capacity 500 VA Section 4.3 Supported Networking Standards Parameter 10 Mbps...
  • Page 45 RUGGEDCOM RSG2488 Chapter 4 Installation Guide Technical Specifications Weight 8.6 kg (19 lbs) Enclosure Aluminum Mechanical Specifications...
  • Page 46 Chapter 4 RUGGEDCOM RSG2488 Technical Specifications Installation Guide Mechanical Specifications...
  • Page 47: Dimension Drawings

    RUGGEDCOM RSG2488 Chapter 5 Installation Guide Dimension Drawings Dimension Drawings NOTE All dimensions are in millimeters, unless otherwise stated. 442.4 Figure 22: Overall Dimensions...
  • Page 48 Chapter 5 RUGGEDCOM RSG2488 Dimension Drawings Installation Guide 483.5 465.2 21.1 Figure 23: Rack Mount Dimensions...
  • Page 49 RUGGEDCOM RSG2488 Chapter 5 Installation Guide Dimension Drawings 480.5 490.6 Figure 24: Panel and Din Rail Mount Dimensions 1. DIN Rail Centerline 110.0 21.8 Figure 25: 4-Port Line Module Dimensions...
  • Page 50 Chapter 5 RUGGEDCOM RSG2488 Dimension Drawings Installation Guide 49.8 21.8 Figure 26: 2-Port Line Module Dimensions 43.9 129.8 Figure 27: Power Module Dimensions...
  • Page 51: Certification

    Installation Guide Certification Certification The RUGGEDCOM RSG2488 device has been thoroughly tested to guarantee its conformance with recognized standards and has received approval from recognized regulatory agencies. NOTE Certifications related to individual modules are detailed in the RUGGEDCOM Modules Catalog for the device available online.
  • Page 52: European Union (Eu)

    Hazardous Substances The device is marked with a CE marking and can be used throughout the European community. A copy of the CE Declaration of Conformity is available from Siemens Canada Ltd. For contact information, refer to “Contacting Siemens”.
  • Page 53: Acma

    Section 6.1.6 RoHS This device is declared by Siemens Canada Ltd to meet the requirements of the following RoHS (Restriction of Hazardous Substances) directives for the restricted use of certain hazardous substances in electrical and electronic equipment: • China RoHS 2...
  • Page 54: Emc And Environmental Type Tests

    Chapter 6 RUGGEDCOM RSG2488 Certification Installation Guide • IEC 61850-3 General Requirements • IEC 61000-6-2 Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity for Industrial Environments Section 6.2 EMC and Environmental Type Tests The RSG2488 has passed the following EMC and environmental tests.
  • Page 55: Copper Ports

    RUGGEDCOM RSG2488 Chapter 6 Installation Guide Certification Test Description Test Levels Severity Levels IEC 61000-4-10 Damped Oscillating Enclosure Ports 100 A/m for 1 s (100 Magnetic Field kHz and 1 MHz) IEC 61000-4-11 Voltage Dips AC Power Ports 30% for 1 period...
  • Page 56: Environmental Type Tests

    Chapter 6 RUGGEDCOM RSG2488 Certification Installation Guide Description Test Levels AC Power Ports Dielectric Strength Signal Ports 2 kV DC Power Ports 1.5 kVDC AC Power Ports 2 kV Fast Transient Signal Ports ± 4 kV at 2.5 and 5 kHz...

Table of Contents