Removing The Transport Lock - Hettich ROTOFIX 46 Operating Instructions Manual

5.2

Removing the transport lock

AB4600en
NOTICE
Damage to the device due to improper lifting.
−
Do not lift the centrifuge by the control panel or the
control panel holder.
Personnel:
■
Trained user
1. If present: Remove the packaging tapes.
2. Lift the box up and remove the padding.
3. Remove the accessories and store them safely.
4. Place the device on a stable and level surface.
Personnel:
■
Trained user
5
1
4
2
4
Fig. 14: Transport lock
1 Screws
2 Motor cover
3 Bellows
4 Transport lock
5 Screws for transport lock
1. Open the lid.
2. Remove 4 screws ( ).
3. Remove the motor cover ( ).
4. For ROTOFIX 46 H:
Remove the bellows ( ).
5. Remove 3 screws ( ) and 3 transport locks ( ).
6. Keep the screws and transport locks in a safe place.
7. For ROTOFIX 46 H:
Insert the bellows ( ).
Push the bellows ( ) over the edge of the rotor vessel. Note the recess
for the cable.
8. Turn over the motor cover ( ) and screw it in.
Rev.: 09 / 11.2023
Commissioning
3
17 / 39
1
2