Advertisement
Recommended Cables
NI offers two lengths of optional SEARAY™ to SEARAY cables for connecting to the
pins on the front panel. The following table shows the details for each.
Model Name
SR240M-SR240M Cable, LVDS with SE, 0.5m
SR240M-SR240M Cable, LVDS with SE, 1.0m
Installing the Software
You must be an Administrator to install NI software on your computer.
1. Install an ADE, such as LabVIEW or LabWindows™/CVI™.
2. Download the driver software installer from ni.com/downloads.
NI Package Manager downloads with the driver software to handle the
installation. Refer to the
about installing, removing, and upgrading NI software using NI Package
Manager.
3. Follow the instructions in the installation prompts.
Note
installation. Accept the prompts to complete the installation.
4. When the installer completes, select Restart in the dialog box that prompts
you to restart, shut down, or restart later.
Installing FlexRIO Modules
This section contains general installation instructions for installing a FlexRIO
module in a PXI Express chassis. Refer to your chassis user manual for specific
instructions and warnings. To install a module, complete the following steps:
6
ni.com
NI Package Manager Manual
Windows users may see access and security messages during
PXIe-6569 Getting Started Guide
Part Number
787317-0R5
787317-01
for more information
Advertisement
