Verifying The Kit Contents; Installing Software On The Host Computer - National Instruments PXIe-7858 Getting Started

Store the device in the antistatic package when the device is not in use.

Verifying the Kit Contents

Verify that the following items are included in the NI PXIe-7858R kit.
Figure 1. NI PXIe-7858R Kit Contents
1. Hardware
2. NI-RIO Media
3. Getting Started Guide

Installing Software on the Host Computer

Before using the NI PXIe-7858R, you must install the following application software
and device drivers on the host computer.
1. LabVIEW 2016 or later
2. LabVIEW Real-Time Module 2016 or later
3. LabVIEW FPGA Module 2016 or later
4. NI R Series Multifunction RIO Device Drivers August 2016 or later
Visit ni.com/info and enter the Info Code softwareversion for minimum software
support information.
1
LabVIEW Real Time Module is only required when the R Series board is used in a
chassis where the PXIe Controller is running a real-time operating system.
1 2
PXIe-7858 Getting Started
3
[1]
© National Instruments
5