Advertisement
2. In the configuration tree, expand Devices and Interfaces to see the list of
installed NI hardware.
Installed modules appear under the name of their associated chassis.
3. Expand your Chassis tree item.
MAX lists all modules installed in the chassis. Your default names may vary.
Note
Module (BT - KU035)" or "NI FlexRIO Module (BT - KU060)".
Note
list of installed modules. If the module is still not listed, power off the
system, ensure the module is correctly installed, and restart.
4. Record the identifier MAX assigns to the hardware. Use this identifier when
programming the PXIe-6569.
5. Self-test the hardware by selecting the item in the configuration tree and
clicking Self-Test in the MAX toolbar.
MAX self-test performs a basic verification of hardware resources.
Accessing FlexRIO with Integrated I/O Examples
The FlexRIO driver includes several example applications for LabVIEW. These
examples serve as interactive tools, programming models, and as building blocks
in your own applications. To access all FlexRIO with Integrated I/O getting started
examples, complete the following steps.
1. In LabVIEW, click Help » Find Examples.
2. In the NI Example Finder window that opens, click Hardware Input and
Output » FlexRIO » Integrated IO » Getting Started.
3. Double click Getting Started with FlexRIO Integrated IO.vi.
The FlexRIO with Integrated IO Project Creator window opens.
4. Select the example that corresponds to the name of your FlexRIO module.
The Description window includes a short description of the getting started
Device Manager identifies the PXIe-6569 as the "NI FlexRIO
If you do not see your module listed, press <F5> to refresh the
PXIe-6569 Getting Started Guide
© National Instruments
19
Advertisement
