Figure 3-18: Lgw; Table 3-2: Lgw - Baicells Nova430i Installation Manual

Nova430i Outdoor 4x250mW Two-Carrier TDD eNodeB Installation Guide

Figure 3-18: LGW

Table 3-2: LGW

Field Name
LGW
LGW Mode
LGW Interface Binding
LGW IP Pool
LGW IP Pool Netmask
IPV6 Switch
Description
LGW (ON or OFF). Default is ON.
Select an option:
NAT: Packages from the internal network to the external network need Network
Address Translation
Router: Select optimized route from the routing table (Figure 3-19).
Bridge: Transfer in the data link layer.
The IP address LGW used for data unloading. Select from configured interfaces.
Default is WAN interface. The VLAN interface can also be used to separate
different links.
Enter the starting IP address of the dynamic IP address pool. The LGW assigns a
local IP address for the accessed CPE to manage the CPEs.
For example, if the first IP address is 10.10.10.1 and the netmask is 255.255.255.0,
the IP address pool includes 254 IP addresses. The options are shown in the drop-
down menu:
The IPV6 network interface is used for in-band connectivity with the switch, as
ON and OFF.
28