Baicells Nova430i Installation Manual page 9

Outdoor 4x250mw two-carrier tdd enodeb
Hide thumbs Also See for Nova430i:
Table of Contents

Advertisement

Nova430i Outdoor 4x250mW Two-Carrier TDD eNodeB Installation Guide
NOTE 1: Legacy Gen 1 CPEs do not support SAS.
NOTE 2: This installation guide only covers the basic configuration of a single cell for verifying
that the eNB unit is operational during the process of installation. More detailed configuration
guides are available on the Baicells website: Baicells.com > Resources > Documents:
CloudCore Configuration and Network Administration Guide
Atom CAT4 CPE Configuration Guide
Atom CAT6/CAT15 CPE Configuration Guide
4G LTE eNodeB Configuration Guide – BaiBLQ (formerly QRTB)
Carrier Aggregation and Dual Carrier/Split Mode Configuration Guide
HaloB Solution User Guide
SAS Deployment Guide
In addition to the Nova430i eNB's two carriers and multiple operating modes, the following is a list of
other key features. The Nova430i datasheet providing technical specifications is kept up-to-date on the
Baicells
website.
Supports standard LTE TDD Band 48 (3550 MHz–3700 MHz)
Complies with 3GPP Release 15 standards
Supports 5/10/15/20 MHz bandwidth per carrier
Provides excellent Non-Line-of-Sight (NLOS) coverage
Peak rate is a configurable parameter using special Subframe Assignment (SA):
o 2x20 MHz, per carrier:
SA1: DL 105 Mbps, UL 28 Mbps
SA2: DL 145 Mbps, UL 14 Mbps
SA6: DL 85 Mbps, UL 35 Mbps
o 2x10 MHz, per carrier:
SA1: DL 51 Mbps, UL 14 Mbps
SA2: DL 70 Mbps, UL 7 Mbps
SA6: DL 42 Mbps, UL 17 Mbps
Supports 96 concurrent users per carrier [x2 carriers (96+96) if operating in DC mode];
upgradeable to higher capacity in future software releases
Supports TR-069 network management interface
Can be accessed via GUI-based local and remote web management
Connects to any IP-based backhaul, including public transmission
Is lightweight and uses low power consumption to reduce OPEX
Compact, plug-and-play device with Self-Organizing Network (SON) capabilities
Can be used for Internet of Things (IoT) with all mainstream EPC vendors
Ensures secure protection against illegal intrusion
Integrated high-gain internal antenna
Compact, all-in-one design of internal antenna and Global Positioning System (GPS)
Integrated small cell form-factor for quick and easy installation
Configured out-of-the-box to work with Baicells CloudCore
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pbs3101s

Table of Contents